
Driver Installation Under Windows
www.lsi.com/channel/products 35
To install Windows 2003 and the 3ware driver
1 Boot from the Windows Server 2003 installation CD and press F6 when
you see the message: “Press F6 if you need to install a 3rd party SCSI or
RAID driver” at the bottom of the display.
2 When you see the message: “Setup could not determine the type of one or
more mass storage devices or you have chosen to manually specify an
adapter…”
Type S to specify that you have an additional 3ware RAID controller.
3 Insert the 3ware driver disk and press Enter.
4 When a box with LSI 3ware 9750 RAID Controller appears, press
Enter to select it.
5Type S if you have additional devices to add. Otherwise, press Enter.
6 If the “Digital Signature Not Found” message appears, click Ye s to
continue the installation.
(If there are multiple controllers in the system, you will see this message
once for each controller.)
7 Continue with the normal Windows installation at this point. There are no
instructions after installing the driver that are specific to 3ware. If you
need additional instructions, refer to the Windows documentation
supplied by Microsoft.
8 Follow the instructions under “Making Units Managed by a 3ware
Controller Available to Windows” on page 38.
To install Windows Server 2008, Vista, or Windows 7 and the
3ware driver
1 Boot from the Windows Server 2008, Vista, or Windows 7 installation
CD and specify the following: Language to Install, Time and currency
format, and Keyboard or input method. Click
Next and then click Install
Now
.
2 Accept the Microsoft License Terms and click
Next.
3 When the message “Which type of installation do you want:?” appears,
click
Custom (advanced).
4 When the message “Where do you want to install Windows?” appears,
click
Load Driver.
5 Insert the media with the 3ware driver. It can be a floppy, USB flash
drive, CD, or DVD. Once inserted, select
Browse or OK and navigate to
the location of the driver.
urenrjrjkvnm
Med
urenrjrjkvnm
coin
coin
Cinema