LSI ICH6R Uživatelský manuál stáhnout pdf (Strana 68)

7-2 Troubleshooting

7.2 Embedded SATA Software RAID Problem Report Form

Table 7-2 contains a form you can just to record problems with the Embedded

SATA Software RAID.

One of the hard drives in a mirrored (RAID

1) array has failed.

Replace the failed drive with another drive that has the same or

greater capacity.

You insert a new drive with no

configuration into the slot which is already

part of a mirrored (RAID 1) array.

Press any key to enter the BIOS Configuration Utility (Ctrl-M) to

configure the new drive. Mark the drive as one of the following:

• Failed - If the AutoRebuild option is disabled in the configuration

utility

• Rebuilding - If the AutoRebuild option is enabled in the

configuration utility

You insert a new drive with no

configuration into the slot which is already

part of a striped (RAID 0) array or there is

a striped (RAID 0) array by itself in the

system.

Press any key to enter the BIOS Configuration Utility (Ctrl-M) to

configure the new drive.

Table 7.1 Problems and Suggested Solutions

Problem Suggested Solution

1 2 ... 63 64 65 66 67 68 69 70 71 72

Žádné komentáře

LSI ICH6R Uživatelský manuál Strana 68